Modem Configuration - Adjusting Dialing Parameters - FP Mailing Solutions ultimail Operator's Manual

13.15 Modem configuration – adjusting dialing parameters
Francotyp-Postalia customer service sets, during ultimail commissioning, correct
dialing parameters for the built-in modem. After moving to new premises or any
change of your phone equipment, you should check the settings and adjust them if
necessary.
SET UP
SYSTEM SETTINGS
MODEM
• Call SET UP menu with the
• Select SYSTEM SETTINGS
MODEM.
The ADJUST MODEM CONFIGURA-
TION menu offers the selection of
possible parameter settings. The table on
page 112 lists and explains all parame-
ters.
During setting procedure, all parameters
that are not technically reasonable do not
appear or further parameters are
displayed, depending on the selected
parameters.
• Press the associated keys until all
required settings display the desired
values.
For seizing an outside line with
exchange digit:
Select EXCHANGE DIGIT to open the
menu for setting / editing the exchange
digit shown.
• Save the parameters with SAVE.
• End the display of the new modem
settings with CONTINUE.
System settings 111
key.