Setting Weighing Mode - FP Mailing Solutions ultimail Operator's Manual

13.12.2 Setting weighing mode

In the ADJUSTING THE INTERNAL SCALES menu you can change the weighing
mode to NORMAL and use the ultimail simply as scale. For this purpose, differential
weighing has to be switched off (refer to page 51).
INTEGRATED SCALES
Possible settings and their meaning:
SET UP
SYSTEM SETTINGS
LOCK
NORMAL
• Call SET UP menu with the
• Select SYSTEM SETTINGS
INTEGRATED SCALES.
• Press the key next to WEIGHING
MODE. The setting switches between
LOCK and NORMAL.
The NORMAL weighing mode is not
available for rate calculation.
When quitting the menu, the ultimail
automatically sets the weighing mode
back to LOCK.
If you add further mail pieces to the
delivery on the weighing tray and take
them off again, the scale will not
determine any new weight. The original
display remains unchanged.
Only if you fall below the initial weight or
fully unload the scale, the ultimail
determines a new weight (=default
setting).
The ultimail will continuously determine
the loaded weight and display the
momentary value.
System settings 105
key.