Ultimail With Sealer - FP Mailing Solutions ultimail Operator's Manual

32 ultimail Operator Manual
5.4.2

ultimail with sealer

Letter guide
face
When the display shows the home menu
and the ultimail is in METERING mode
(indication in the status line) you can
position and meter letters.
Positioning single mail pieces
• Place the letter on the letter receiving
tray at the sealer so that:
– the envelope flap is face down
– the side to be printed is face up
(address window is visible)
– the upper edge is flush to the letter
guide face.
• Push the envelope in until the letter
sensor recognizes the envelope and
starts letter transport.
The sealer feeds the letter, moistens the
flap (if seal function is switched on) and
transfers the letter to the postage meter.
The metered letter is placed in the catch
tray.
You can also start letter transport with the
key.