Neutral Switch Inspection; Brake Light Switch Inspection; Clutch Switch Inspection - Honda VT600C Shadow VLX Service Manual

N EUTRAL SWITCH
I N S P E CT I O N
Remove t h e left side cover a n d disconnect the 2P ( Black) con­
nector.
Check the neutral switch for continuity between the light
green/red connector and body gro u n d .
There s h o u l d b e contin uity between t h e l ight green/red con­
nector and body ground .
There should be continuity with the transmission i n neutral and
no continuity with the transmission in any gear.
If there is no continuity i n neutral , remove the drive sprocket
cover (page and check the wire connection for an open
1 3- 1 4)
circuit.
BRAK E LI GHT SWITCH
F R O N T I N S P E CT I O N
Disconnect the front brake light switch connectors and check
for contin u ity between the switch terminals.
There should be continuity with the front brake applied, and no
continu ity with the brake release d .
Replace t h e switch i f necessary .
R E A R I N S P ECTI O N
Disconnect the rear brake light switch connector and check for
contin u ity between the terminals.
There should be continuity with the rear brake applied and no
continuity with the rear brake released .
Replace the rea r brake light switch , if necessary .
CLUTCH SWITCH
I N S P E C T I O N
Disconnect the clutch switch wire connectors.
Check for continuity between the switch terminals.
There should be continuity with the clutch applied and no con­
tinuity with the clutch released .
Replace the clutch switch if necessary.
LIGHTS/METER/SWITC H ES
1 8- 1 1