Starter Clutch Assembly; Flywheel Installation - Honda VT600C Shadow VLX Service Manual

ASS E M B LY
Install the oneway clutch i nto the clutch outer with the flange
side facing inside.
Hold the flywheel with the flywheel holder. Apply locking
agent to the trox bolt threads and tighten the bolts .
TORQUE : 30 N · m ( 3 . 0 kg-m, 22 ft-lb)
TOOLS :
Flywheel holder
Torx bit
FLYWHEEL I NSTALLATION
Clean the crankshaft and install the woodruff key.
Install the needle bearing onto the crankshaft.
Instal l the starter d riven gear and washer onto the crankshaft .
07725-0040000
Equivalent commercially
available i n U . S.A.
07703-00 1 0 1 0 0
Equivalent commercially
avai lable i n U . S.A.
ALTERNATOR/STARTER CLUTCH
(3) ON EWA Y CLUTCH
8- 5