SERVICE I N FO R M AT I O N
T R O U BLESHOOTI N G
REAR WH EEL
R EAR BRAKE
SERVICE I N FORMATION
G E N E R A L
•
Support the motorcycle using a hoist or a jack under the engine.
CAUTION
Do not jack up the motorcycle using the oil filter.
•
Use only genuine Honda replacement fasteners for the rear suspension.
•
Note the i nstallation direction of the bolts.
•
A ny attempt to mount automobile tires on a motorcycle rim may cause the tire bead to separate from the rim with
enough explosive f orce to cause serious injury or death.
•
The rear shock absorber contains nitrogen under high pressure. Do not allow fire or heat near the shock absorber. Use only nitro
gen to pressurize the shock absorber. The use of an unstable gas can cause a tire or explosion resulting in serious energy.
•
Before disposal of the shock absorber, release the nitrogen by pressing the valve core. Then remove the valve from the shock ab
sorber.
•
Inhaled asbestos fibers have been found to cause respiratory disease and cancer. Never use an air hose or dry brush to clean brake
assemblies. Use an OSHA -approved vacuum cleaner or alternate mothod approved by OSHA, designed to minimize the hazard
coused by airborne asbestos fibers.
S P E C I F I C AT I O N
ITEM
Rear wheel runout
Rear axle runout
Rear brake drum I . D .
Rear brake lining thickness
Shock absorber spring free length
Rear suspension damper compression
T O R Q U E VALU E S
Spokes
Sprocket nut
Shock absorber mounting bolt
Swingarm pivot bolt
Rear axle
Damper rod lock nut
Brake torque rod nut
1 3. REAR WH EEL/ B RAK E/SUSP E NSION
1 3- 1
1 3-2
1 3- 3
1 3- 7
Radial
Axial
1 3 . 4 - 1 7 . 4 kg ( 2 9 . 5 4 - 3 8 . 36 lb)
4 N•m (0.4 kg-m, 2.9 ft-lb)
65 N·m ( 6 . 5 kg-m, 4 7 ft-lb)
45 N•m (4. 5 kg-m, 33 ft-lb)
90 N•m ( 9 . 0 kg-m , 6 5 ft-lb)
90 N•m ( 9 . 0 kg-m, 6 5 ft-lb)
70 N·m (7.0 kg-m , 51 ft-lb)
27 N•m (2. 7 kg-m , 20 ft-lb)
BRAKE PEDAL
S H O C K ABSORBER
SWINGARM
S EAT /REAR FENDER/S U B-FRA M E
STANDARD
--
--
--
1 60 mm ( 6 . 3 in)
5 mm (0. 2 in)
1 37 . 5 m m ( 5 . 4 1 in)
1 3- 1 0
1 3- 1 1
1 3- 1 4
1 3- 1 8
Unit: mm (in)
SERVICE LIMIT
2 . 0 mm (0.08 in)
2 . 0 mm (0.08 in)
0 . 2 mm (0.01 in)
1 6 1 mm ( 6 . 3 in)
2 mm (0.08 in)
1 3 5 . 0 mm ( 5 . 3 1 in)
1 3 . 3 kg ( 2 9 . 3 2 lb)
1 3- 1