FRONT WHEE L/S U SPENSION/STE E R I N G
D I SA S S E M BLY
Remove the fork cap bolt .
•
The cap bolts are under spring pressure. Take care when re
moving, and wear eye and face protection.
Remove the fork spring, seat washer and spacer.
Pour out the fork fluid by pumping the fork up and down sever
al times .
Hold the fork slider in a vise with soft jaws or a shop towe l .
CAUTION
•
Do not distort the fork slider in the vise.
I nstall the special tool i nto the fork tube and hold the piston,
then remove the socket bolt.
TOOLS :
Bottom holder pipe
07930-KA50000
N ot available i n U . S .A.
- holder attachment
07930- KA5 0 1 00
N ot available i n U . S .A.
- bottom holder handle
07930- KA40200
N ot available i n U . S .A.
Remove the dust seal and stop ring .
CAUTION
•
Be careful not to damage the fork tube.
1 2- 1 4
( 1 ) FORK CAP
( 1 ) HOLDER HANDLE
( 1 ) D U ST SEAL