Honda VT600C Shadow VLX Service Manual page 96

EN G I N E REMOVAL/ I N STALLATIO N
Disco n ncet the ignition pulse generator wire connector(4P
WH ITE) .
Remove t h e lower radiator hose ( radiator-to-water pump) .
Disconnect the water hoses (thermostat housing-to-cylinder
heads) from the cylinder heads ( page 9-3 ) .
Place a floor jack o r other adjustable support under the engi ne.
• NOTE
The jack height must be continually adjusted to relieve
stress for ease of bolt removal .
Remove the following :
- rear wheel (page 1 3-3)
- swingarm (page 1 3- 1 4)
- front upper engine bracket (two 8 mm bolts, 1 0 mm bolt
and collar)
- front lower engine bracket ( 8 mm bolts and 1 0 mm bolt)
- rear engine bracket (two 8 mm bolts and 1 0 mm bolt)
•
N OTE
Do not damage the radiator fin .
6-4
�
SWI N ARM PIVOT
BOLT