Ignition Coil Replacement - Honda VT600C Shadow VLX Service Manual

If the resistance is out of range, remove the spark plug wires
and measure the resistance between the secondary coil termi­
nals.
k O
STAN DARD : 1 9 . 8 - 24 . 2
R E PLAC E M E N T
Rear ignition coil
Remove the right side cover.
Disconnect the fuse connectors and starter relay switch from
the case .
Front ignition coil
Remove the fuel tank ( page 4-3 ) .
Remove the crankcase breather tank from the frame.
Remove the ignition coil mounting bolts and disconnect the
primary terminals from the coils.
Remove the spark plug caps from the spark plugs.
Install the new ignition coil in the reverse order of the removal .
NOTE
Connect the primary wire terminals properly.
•
Front coi l : black terminal - black/white wire
green terminal - yellow/blue wire
Rear coi l : black terminal - black/white wire
green termina l - blue/yellow wire
(20° C/68 ° F)
I G N ITION SYSTEM
1 )
C R A N K C A S E
BR EATH E R
TA N K
•
1 6 - 5