Tighten the thermostat housing cover mounting bolts .
NOTE
Be sure to secure the thermostat ground wire with the
cover mounting bolt shown.
I nstall a new 0-ring on the radiator filler, and connect the
u pper radiator hose to the radiator.
I nstall the radiator filler onto the thermostat housing.
Tighten the filler and thermostat housing mounting bolts .
Install the remaining removed parts in the reverse order of re
mova l .
F i l l t h e system with coolant.
RADIATOR/COOLI NG FAN
R E M O V A L
NOTE
•
For fan motor i nspection, refer to section 1 8 .
Remove the steering cover and disconnect the fan motor con
nector ( 2 P BLACK)
Remove the horn mounting bolt and horn, then disconnect the
horn wires.
Remove the radiator mounting bolt and disconnect the lower
radiator hose from the radiator by loosening the hose band.
COOLING SYSTEM
5- 5