Clutch Inspection - Honda VT600C Shadow VLX Service Manual

CLUTCH/GEA R S H I FT L I N KAGE
Remove the drive sprocket and clutch outer guide from the
mainshaft.
I N SPECT I O N
Check the lifter plate bearing for damage.
Turn the bearing inner race with your finger.
The bearing should turn smoothly and quietly .
Also check that t h e bearing outer race fits tightly in t h e clutch
lifter plate .
Replace the bearing if necessary .
Measure the spring free length .
SERVICE LIMIT: 88; 88; 37.4 mm ( 1 .47 in)
After 89; 4 1 , 6 mm ( 1 . 6 5 in)
�
Replace the lutch discs if they show signs of
coloration.
Measure the thickness of discs A and B.
SERVICE LIMIT: ( A I 2 . 30 m m (0.090 in)
(8) 2 . 60 mm (0. 1 02 in)
N OTE
Replace the discs and plates as a set if any one is beyond
•
the service limit.
7 -6
s
coring or dis­
BEARI N G
( 1 1
( 2 ) CLUTCH L I FTER PLATE
-�