Starter Clutch Disassembly; Starter Clutch Inspection - Honda VT600C Shadow VLX Service Manual

ALTERNATOR/STARTER CLUTCH
STARTER CLUTCH
D I SA S S E M B LY
Reinstall the starter driven gear i nto the flywheel .
I nspect the starter clutch by turning the starter driven gear.
The gear should turn counterclockwise freely and should not
turn clockwise: if it turns i ncorrectly, replace the starter
clutch.
Hold the flywheel with the flywheel holder and remove the
torx bolts using a torx bit.
Remove the starter clutch outer and oneway clutch.
TOOLS :
Flywheel holder
Torx bit
I N S PECTI O N
Measure the O . D . of the starter driven gear.
SERVICE LIMIT: 57.6 0 mm (2.268 in)
I nspect the oneway clutch for wear or damage and replace if
necessary .
8 -4
07725-0040000
Equivalent commercia l ly
ava i l a ble in U .S.A.
07703-001 0 1 00
Equivalent commercially
available in U .S.A.
( 1 STARTER DRIVEN GEAR
l
( 1 STARTER DRIVEN GEAR
l
( 1
ON EWAY CLUTCH
l