Dome Setup - Eneo 22X User Manual

3.12 Dome Setup

• LANGUAGE SETUP
LANGUAGE
• HOME FUNCTION SETUP
HOME FUNCTION
FUNCTION NUMBER
WAITING TIME
FUNCTION ENABLE
The Home function can be set so that the camera automatically goes to Preset, Tour, Pattern,
Auto Scan after the keyboard controller has been idle for a amount of time.
For example, if the controller is idle for 120 seconds, the camera goes to Preset 1.
Follow these steps to program the Home position:
1. Select "HOME FUNCTION" by pushing the Joystick to the left or right to scroll through the
None, Tour, Pattern, Auto Scan or Preset functions.
2. Select "FUNCTION NUMBER" and push the Joystick to the left or right. The recorded
function number will scroll.
3. Select "WATING TIME" and push the Joystick to the left or right to select from 10 to 240
seconds.
4. Select "FUNCTION ENABLE" and turn to ON or OFF by pushing the Joystick to the left or
right.
CONFIGURATION MENU
LANGUAGE
HOME FUNCTION SETUP
OSD DISPLAY
VIEW ANGLE SETUP
INITIALIZE DATA
ORIGIN OFFSET
DOME RESET
SYSTEM MENU
SYSTEM INFORMATION
SAVE AND EXIT(ESC TO CANCEL)
: Select the language you want.
HOME FUNCTION SETUP
HOME FUNCTION
FUNCTION NUMBER : ---
WATING TIME
FUNCTION ENABLE : OFF
SAVE AND EXIT(ESC TO CANCEL)
: None / Tour / Pattern / Auto Scan / Preset
: - - -
: 10~240 seconds
: ON / OFF
22
: ENGLISH
: NONE
: 120 SEC