Network - Eneo 22X User Manual

4) Network

Setting in regard to network can be executed. Settings for IP, DNS, Host Name, Port, and
ARP/Ping can be established, along with setting for DDNS, uPnP, QoS, and SNMP.
① Basic
• IP Address Configuration:
- Obtain IP address via DHCP: Dynamic Host Configuration Protocol (DHCP) is a
protocol that lets network administrators centrally manage and automate the
assignment of IP addresses on a network. DHCP is enabled by default. Although a
DHCP server is mostly used to set an IP address dynamically, it is also possible to
use it to set a static, known IP address for a particular MAC address.
- Use the following IP address: To use a static IP address for the network camera,
check the radio button and then make the following settings:
* IP address: Specify a unique IP address for your network camera.
* Subnet mask: Specify the mask for the subnet the network camera is located on.
* Default router: Specify the IP address of the default router (gateway) used for
connecting devices attached to different networks and network segments.
57