Table of Contents
Advertisement
• SYSTEM INFORMATION
The system information provides essential information about the dome camera if service is
required. When you view this screen, you can determine the camera type, ROM version.
The information on this screen cannot be modified.
3.13 Dome Communication
To prevent damage, each dome camera must have a unique address (ID).
When installing multiple dome cameras using a multiplexer, it is suggested that the dome camera
address match the multiplexer port number.
The factory default setting is 1.
Example: Port 1 = Dome 1, Port 2 = Dome 2 ... Port 16 = Dome 16. If more than 16 dome
cameras are installed using two or more multiplexers, ID of the dome camera should be ID of
MUX x No. of camera IN. (e.g. multiplexer ID= n, Camera IN= m then ID of Dome =16x(n-1)+m )
SYSTEM INFORMATION
CAMERA TYPE
: xxxxx-xxxxxx
H/W VERSION
: Vx.xx
ROM VERSION
: Vx.xx
PROTOCOL
: xxxx
BAUDRATE
: 9600
EXIT(ESC TO EXIT)
DOME COMMUNICATION SETUP
DOME ID
: 001
PROTOCOL : AUTO
BAUDRATE : 9600
SAVE AND EXIT(ESC TO EXIT)
28
Advertisement
Table of Contents
