Eneo 22X User Manual page 27

The NIGHT SHOT option removes the IR cutoff filter of the camera and makes the camera
sensitive to near infrared.
AUTO
GLOBAL
The operator can enable NIGHT SHOT for all dome cameras at the same time.
If the NIGHT SHOT mode is set to GLOBAL, "999" + ENTER will turn Off the NIGHT
SHOT mode and "888" + ENTER will turn On the NIGHT SHOT mode.
ON
OFF
NOTE: AUTO in NIGHT SHOT function is not applied in "MANUAL" mode of AE Control.
• DNR CONTROL
2DNR(1), 2DNR(2)
3DNR(1), 3DNR(2)
NOTE: DNR(1) applied when motor stopped. DNR(2) applied when motor moving.
Camera goes in to B&W mode at low light.
Controlled by the keyboard
(NOTE: GLOBAL function operates F2E protocol only)
B/W mode
Color mode
DNR CONTROL SETUP
2DNR(1)
3DNR(1)
2DNR(2)
3DNR(2)
SAVE AND EXIT(ESC TO CANCEL)
Select 2D noise reduction level (OFF / 001~007)
Select 3D noise reduction level (OFF / 001~031)
: 001
: 010
: 001
: 003
21