Eneo 22X User Manual page 61

• HTTPS Connection Policy:
Choose the form of connection you wish to use from the drop-down list for the
administrator, Operator and Viewer to enable HTTPS connection (set to HTTP by
default).
- HTTP
- HTTPS
- HTTP & HTTPS
• Upload Certificate:
To use HTTPS for communication with the network camera, An official certificate issued
by a CA (Certificate Authority) must be uploaded from your PC. Provide the path to the
certificate directly, or use the Browse button to locate it. Then click the Upload button.
Please refer to the home page of your preferred CA for information on where to send the
request. For more information, please see the online help.
③ IP Filtering
Checking the Enable IP address filtering box enables the IP address filtering function.
Up to 256 IP address entries may be specified (a single entry can contain multiple IP
addresses). Click the Add button to add new filtered addresses.
When the IP address filter is enabled, addresses added to the list are set as allowed or
denied addresses. All other IP addresses not in this list will then be allowed or denied
access accordingly, that is, if the addresses in the list are allowed, then all others are
denied access, and vice versa. Please see also the online help for more information.
Note that users from IP addresses that will be allowed must also be registered with the
appropriate access rights (Guest, Operator or Administrator). This is done from Setup >
System > Security > Users, on "4.5.5 System > 2) Security > ① Users".
55