Table of Contents
Advertisement
• ORIGIN OFFSET
This feature is useful to align a new dome camera exactly the same as the previously installed
dome camera.
Dome camera's origin set and all data initialize option do not override offset values. Only the
default set option in this menu will set the offset value to zero. This can be used to avoid ceiling
obstructions.
• DOME RESET
This feature is used to re-calibrate the orientation of a selected dome camera. Origin offset value
is not affected by this function. (Offset is still valid after origin set.)
• SYSTEM MENU
CALIBRATION
PASSWORD ENABLE
MENU TIME OUT
BLINK CURSOR
DOME ANSWER
This option is helpful to escape the collision of the command using some DVR.
OFFSET SETUP
PAN OFFSET
TILT OFFSET
ENABLE
SAVE AND EXIT(ESC TO CANCEL)
DOME RESET
ARE YOU SURE ?
CANCEL
OK
SYSTEM MENU
MOTOR SETUP
PASSWORD EDIT
ORIGIN CHECK
CALIBRATION
PASSWORD ENABLE
MENU TIME OUT
BLINK CURSOR
DOME ANSWER
SAVE AND EXIT(ESC TO CANCEL)
: ON(Auto origin check) / OFF
: ON(requires the password to enter menu) / OFF
: ON(5mintues) / OFF(always menu display)
: ON / OFF(no blinking cursor)
: ON / OFF(no acknowledge command from the dome)
26
(CTRL KEY)
: 000.0
: 000.0
: OFF
: ON
: OFF
: OFF
: ON
: OFF
Advertisement
Table of Contents
