Table of Contents
Advertisement
OSD menu Startup
Press the 'OSD menu SET key' down to access the setup menu mode.
• EXIT : Enters 'EXIT' menu with save current setting or without save.
• RETURN : Returns to the previous menu.
1. LENS
Lens can be selected either DC or MANUAL lens.
It should be selected according to lens type.
: DC is for the best image when DC Auto iris Vari-focal lens is installed.
1-1. DC
• MODE : Selects MODE according to lighting condition.
- INDOOR: Optimized of indoor environment.
- OUTDOOR: Optimized of outdoor environment.
- DEBLUR: It enables to reduce the blur in a certain indoor environment.
Noise or color rolling can be increased.
1-2. MANUAL : MANUAL is for the best image when Fixed lens is installed.
2. ZOOM/FOCUS
2-1. AF MODE
• ZOOMPUSH: Focusing works steadily for sharp focusing on the object.
In the case of a Motor driven lens, focusing resumes in about 7~8 seconds
to save the lens lifetime when the focus gets lost.
• MANUAL: Focusing can only be adjusted by ▲,▼ of OSD control joystick.
2-2. MODE CHANGE
MODE CHANGE is activated to set ZOOMPUSH in AF MODE.
It is for locking of the lens control to prevent undesirable operation.
• ENABLED : Locks and disables the lens operation after 3 hours.
It is recommended to maintain the working-life of the motorized zoom lens.
• DISABLED : Disables the locking feature allowing lens operation at any time.
14
MENU V1. XX
1. LENS
DC
2. ZOOM/FOCUS
3. EXPOSURE
4. BACKLIGHT
OFF
5. DAY&NIGHT
EXTERN
6. COLOR
MIDDLE
7. 3D-NR
8. IMAGE
9. MOTION
OFF
A. SYSTEM
SAVE
B. EXIT
Advertisement
Table of Contents
