Function Run; Factory Setup - Eneo 22X User Manual

3.14 Function Run

This Function Run menu allows you to execute the function when you use a keyboard or a DVR
without the function keys (Preset, Pattern, Tour and Scan).
1. Select the desired Function by pushing the Joystick up or down.
2. Select the number by twist the Joystick in PRESET, PATTERN, TOUR, and SCAN.
3. Press the CTRL or IRIS Open key to execute.
NOTE: To execute the function, you should save the function (PRESET, PATTERN, TOUR,
and SCAN) first.
- HOME
Select "HOME" and press the CTRL key. Then dome camera goes to the default position to
which the dome camera returns after an assigned period of inactivity passes. The default position
may be a Preset, Tour, Pattern or no action.
- AUTO PAN
You can execute the endless auto pan which is to turn one direction continuously by select the
Auto Pan.

3.15 Factory Setup

Pressing 250 + PRST keys pops up this menu.
TOUR DWELL TIME means the dwell time between Tours.
ANSWER DELAY means the response time of the dome and you don't need to change in normal
condition.
FUNCTION RUN SETUP
PRESET
PATTERN
TOUR
SCAN
HOME
AUTO PAN
EXIT(ESC TO EXIT)
FACTORY SETUP
TOUR DWELL TIME
ANSWER DELAY
SAVE AND EXIT(ESC TO CANCEL)
29
(CTRL KEY)
: ---
: ---
: ---
: ---
: 03 SEC
: 03 SEC