System Setup - Eneo MPC-52A0030P0A User Manual

3.10 System Setup

• HOME FUNCTION SETUP
FUNCTION
NUMBER
WAITING TIME
ENABLE
The Home Function can be set so that the camera automatically goes to Tour or Preset after the
keyboard or DVR has been idle for a specified amount of time.
For example, if the controller is idle for 120 seconds, the camera goes to Preset 1.
Follow these steps to program the Home position:
1. Select "FUNCTION" by pressing the Right or Left key to scroll through the None, Tour or
Preset functions.
2. Select "NUMBER" and press the Right or Left key. The recorded function number will scroll.
3. Select "WAITING TIME" and press the Right or Left key to select from 10 to 240 seconds.
4. Select "ENABLE" and turn to ON or OFF by pressing the Right or Left key.
SYSTEM SETUP
HOME FUNCTION SETUP
FACTORY DEFAULT
RESET
OSD DISPLAY
ORIGIN CHECK
FUNCTION RUN
SYSTEM INFORMATION
PRESET FOCUS : AUTO
EXIT(ESC TO EXIT)
HOME FUNCTION SETUP
FUNCTION
NUMBER
WAITING TIME
ENABLE
SAVE AND EXIT(ESC TO CANCEL)
NONE, TOUR, PRESET
---
10 ~ 240 seconds
ON, OFF
: NONE
: ---
: 120 SEC
: OFF
21