Eneo 22X User Manual page 33

MOTOR SETUP
Motor Setup menu provides the pan and tilt speed of a camera. User can set the desired
speed with pushing the Joystick to the left or right. During operation, pressing 153 + ON keys
will change the speed to the SLOW mode and pressing 153 + OFF keys will change the speed
to the Normal mode.
Press and hold the CTRL key and moving the Joystick will operate with the TURBO speed
mode.
PROPOTIONAL P/T
P/T MODE
SLOW MAXIMUM SPEED
NORMAL MAXIMUM SPEED
TURBO MAXIMUM SPEED
PASSWORD EDIT
You can change the password with 6-digit character in this menu.
The default password is 555555.
When the password enable is on, the input password window displays to enter the menu. At
this time, move the cursor to the desired character by the Joystick and press the CTRL or
IRIS Open key.
ORIGIN CHECK
When you find the wrong position of the dome during operation, execute this origin check and
the dome camera will arrange the right position after the origin check operation.
Pressing 151 + ON keys will execute the origin check.
MOTOR SETUP
PROPOTIONAL P/T
P/T MODE
SAVE AND EXIT(ESC TO CANCEL)
: ON / OFF
: SLOW / NORMAL / TURBO
: 40˚/second
: 90˚/second
: 380˚/second
PASSWORD EDIT SETUP
INPUT PASSWORD
PASSWORD :
A B C D E F G H I J
K L M N O P Q R S T
U V W X Y Z 0 1 2 3
4 5 6 7 8 9 ( )
SAVE AND EXIT(ESC TO CANCEL)
ORIGIN CHECK
ARE YOU SURE ?
CANCEL
OK
27
: ON
: NORMAL
(CTRL KEY)