Eneo 22X User Manual page 55

• Audio Alert Setting:
To use the audio alert with the Network Transmitter, an audio data file made by user
must be uploaded from your PC. Provide the path to the file directly, or use the Browse
button to locate it. Then click the Upload button.
An audio file for Audio Alert can be made by Audio Recorder tool in the NautilusClient16
software.
• Audio Alert Test:
When the setup is complete, the audio output can be tested by clicking the Test button.
To remove an audio file, select index and click the Remove button.
Note: For a proper operation of Audio Alert, you must enable "full duplex" in Audio setting
page.
⑥ Audio Recorder
To use Audio Recorder tool to make an audio file for Audio Alert function, you must install
the NautilusClient16 on the installation CD at first.
The NautilusClient16 program (All Programs > NautilusClient16 > NautilusClient16) in
your PC, the main window will be displayed as below.
Click "Tool" in the menu of the main window and select Audio Recorder to start Audio
Recorder. Audio Recorder window will be appeared.
49