Preset (Shortcut: Prst) - Eneo 22X User Manual

Ptz iii network dome camera
Table of Contents

Advertisement

3.5 Preset
(Shortcut: PRST)
If you need to view specific places routinely, you should program Presets. A Preset is a
programmed video scene with automatic pan, tilt, zoom, focus, and AE settings. Once
programmed, placing the number position and pressing the PRST key on your controller calls up
that Preset automatically. In addition, Presets may be assigned to alarm action or as the "home"
position for the dome camera. As many as 120 Presets, whose positions are saved in the dome's
firmware, may be programmed.
There are two pages of Preset menu. Each page has 60 Presets. Pages can be scrolled by
pushing the Joystick to the left or right on the first or last No. of Preset.
Follow steps below to store the Preset positions:
1. Press the PRST key to enter the Preset menu directly. Or press the MENU key to display the
main menu on the monitor. Scroll to Preset and push the Joystick to the right.
2. Select the blank Preset position to be stored by pushing the Joystick up, down, right, or left.
3. After selecting a blank position, press and hold the CTRL key. Use the Joystick to control the
direction of the camera and lens.
4. After aiming the camera (view direction and lens control), release the CTRL key. The cursor
will be on the Title after saving data then twist the Joystick or press the Tele or Wide key to
edit the Preset title. Follow the procedure of the Auto Scan above to edit titles.
5. Select "CAMERA SET" and pushing the Joystick to the left or right. Then the Preset camera
setup displays.
Set FOCUS
Select "AE SETUP" and pushing the Joystick to the left or right. Then the AE setup displays.
Refer to the AE SETUP in the camera setup.
PRESET SETUP
NUMBER
TITLE
CAMERA SET
DWELL
12345678901234567890
00 █**-----------------
02 --------------------
04 --------------------
NEXT PAGE
SAVE AND EXIT(ESC TO CANCEL)
- : blank Preset position
* : position has the Preset
█ : current cursor position
PRESET CAMERA SETUP
FOCUS
AE SETUP
SAVE AND EXIT(ESC TO CANCEL)
: AUTO, MANUAL, ONE PUSH
: 001
: ---
: --- SEC
: AUTO
12

Advertisement

Table of Contents
loading

Table of Contents