Eneo 22X User Manual page 56

The description of each button in the ARecorder window follows.
Open: Open an audio file.
Capture: Capture audio from the microphone in your PC.
Save: Save a captured file to your PC. (PCM format)
Encode: Encode a current capture file or opened PCM file to G.726 file for Audio
Alert.
Play: Play a current audio file.
Stop: Stop playing audio.
Procedures to make an audio file in G.726 format for Audio Alert.
1. Connect the microphone in your PC.
2. Click the Capture button and talk to the microphone to record the audio or voice.
You can record up to 30 seconds. Click the Stop button to stop on capturing.
3. Click the Save button and then set the file name to save a current capture file with PCM
format.
If you don't need to make any PCM file, skip this step and then go to the step 5 directly.
4. Click the Open button and then select the file name to open an audio file in PCM format.
5. Click the Encode button to encode a current audio file to G.726 format for Audio Alert.
Set the file name and encode parameters.
Caution: All parameters must be synchronized with ones in audio setting page of network
devices for a proper operation.
50