Table of Contents
Advertisement
④ Motion
Motion detection is used to generate an alarm whenever movement occurs (or stops) in
the video image. A total of 8 Motion and/or Mask windows can be created and configured.
Motion is detected in defined Motion windows, which are placed in the video image to
target specific areas. Movement in the areas outside the motion windows will be ignored. If
part of a motion window needs to be masked, this can be configured in a Mask window.
• Pre-Viewer:
Motion detection windows are configured by Motion or Mask windows. Each window
can be selected by clicking with the mouse. It is also possible to resize or delete, or
move the window, by selecting the appropriate window at the mouse menu on the video
screen.
To create a motion or mask window, follow steps:
1. Click the right button of mouse to see the mouse menu.
2. Select New Motion (or Mask) Window in the mouse menu.
3. Click and drag mouse to designate a motion area.
43
Advertisement
Table of Contents
