Chapter 3 - Program And Operation; Dome Camera Selection; Accessing The On-Screen Menu Utility; How To Control The On-Screen Menu Utility - Eneo 22X User Manual

Chapter 3 — Program and Operation

3.1 Dome Camera Selection

Before you program or operate a dome camera, you must select the dome camera by pressing
No. + CAM keys.
Example: Pressing 1 , 0 + CAM keys sequentially will select dome camera 10. The selected
dome camera ID will be displayed on the LCD monitor of the keyboard controller.

3.2 Accessing the On-Screen Menu Utility

You can call up the On-screen menu utility on your monitor by pressing the MENU key on the
keyboard controller, the following On-screen menu utility will appear:

3.3 How to control the On-Screen Menu Utility

Function
Call the On-screen menu utility.
Navigate through the menu items.
Go into the sub-menu items.
Change value.
Enter the editing title mode.
Change value of angle.
Enter the changing angle mode.
Exit the changing angle mode.
Escape (EXIT)
DOME MENU
AUTO SCAN
PRESET
TOUR
PATTERN
AREA TITLE
PRIVACY ZONE
CAMERA
DOME SETUP
DOME COMMUNICATION
FUNCTION RUN
EXIT(ESC TO EXIT)
9
Button
MENU
Joystick up or down
Joystick left or right or IRIS Open
Joystick left or right or
Zoom handle twist or Tele , Wide
CTRL + Joystick
IRIS Open
IRIS Close
ESC