Event-Out - Eneo 22X User Manual

2) Event-Out

① SMTP(E-Mail)
The network camera can be configured to send event and error email messages via
SMTP (Simple Mail Transfer Protocol).
• SMTP(E-Mail) Setting:
Select "Enable" to activate the SMTP operation.
- Mail Server / Port: Enter the host names (or IP addresses) and port numbers for your
mail server in the fields provided, to enable the sending of notifications and image
email messages from the camera to predefined addresses via SMTP.
- Sender: Enter the email address to be used as the sender for all messages sent by
the Network Transmitter.
- Interval: Represents the frequency of the email notification when an event occurs.
- Aggregate events: Shows the maximum number of emails sent within each interval.
If your mail server requires authentication, check the box for Use authentication to log
in to this server and enter the necessary information.
- User Name / Password: Enter the User Name and Password as provided by your
network administrator or ISP (Internet Service Provider).
To ensure that the login procedure is performed as securely as possible when using
SMTP authentication, you must define the weakest authentication method allowed.
- Login Method: Set the Weakest method allowed to the highest/safest method
supported by the mail server. The most secure method is listed in the drop-down list:
Login / Plain
45