Operating Instructions; Using Osd Controller; Description Of The Osd Control Operation; Osd Menu Startup - Eneo MSM-42F0037MPA Quick Installation Manual

Operating instructions

Using OSD controller

Setup menu can be accessed and controlled by OSD controller.

Description of the OSD control operation

1. SET Key (●) : Access to the menu or enter the setting. To enter the main menu,
press the Set Key down.
2. UP/DOWN Key (▲/▼) : Choose the desired sub-menu and to move the cursor up or
down.
3. LEFT/RIGHT Key (◄/►) : Set up the value of the selected menu. Used to adjust the
desired menu selection and to move the cursor left or right.
4. '☟' denotes the long press down straightly for about 2 seconds
If CVBS video is enabled through ANALOG OUT0 or Sub-out port, WDR and 3D-NR
i
functions are disabled in all video outputs. It should be considered when installer adjusts
the video with installation monitor via CVBS video signal.

OSD menu startup

Press the 'OSD menu SET key' down to access the setup menu mode.
• EXIT : Enters 'EXIT' menu with save current setting or without save.
• RETURN : Returns to the previous menu.
8

OSD menu table

MENU SUB MENU CONFIGURATION
DC MODE (INDOOOR, OUTDOOR, DEBLUR)
LENS
MANUAL
FOCUS Ast. ON, OFF
BRIGHTNESS 0~20
AUTO
MANUAL
SHUTTER
(SPEED)
EXPOSURE
FLICKERLESS
SENS-UP OFF, x2, x4, x8, x16, x32
AGC 0~10
OFF
HLC LEVEL, COLOR
BLC H/V-POS, H/V-SIZE
BACKLIGHT
MODE
WDR
TARGET-BRT
WEIGHT
EXTERN SMART IR, ANTI-SAT., D>N THRES, N>D THRES, DELAY
AUTO SMART IR, ANTI-SAT., AGC THRES, AGC MARGIN, DELAY
DAY & NIGHT
COLOR
B&W SMART IR, ANTI-SAT.
AWB AUTO, AUTOext, PRESET, MANUAL (C-TEMP, R/B-GAIN)
COLOR
COLOR GAIN 0~20
3D-NR OFF, LOW, MIDDLE, HIGH
MAIN OUTPUT
ANALOG OUT0
SHARPNESS
ANALOG OUT1
SDI OUTPUT
GAMMA 0.45, 0.55, 0.65, 0.75
MIRROR OFF, ON
IMAGE
FLIP OFF, ON
D-WDR OFF, LOW, MIDDLE, HIGH
DEFOG OFF, ON
PRIVACY OFF, ON
1/25, 1/50, 1/100, 1/200, 1/400, 1/800, 1/1600, 1/3200, 1/6400,
1/12800, 1/25600
WINDOW ZONE/USE, H/V-POS,
ROI
H/V-SIZE
NORMAL
LOW, MIDDLE, HIGH
LOW, MIDDLE, HIGH
ANALOG OUT0, ANALOG OUT1, SDI OUTPUT
TVI MODE, AHD MODE, CVBS, CVI MODE
CVBS, TVI MODE, OFF
HD-SDI, EX-SDI 1.0, EX-SDI 2.0, OFF
MODE (AUTO, MANUAL)
LEVEL (LOW, MIDDLE, HIGH)
ZONE NUM, ZONE DISP, H/V-POS, H/VSIZE, Y
LEVEL, CB/CR LEVEL, TRANS
9
EN