Chapter 3 - Program And Operation; Camera Selection; Accessing The On-Screen Menu Utility; How To Control The On-Screen Menu Utility - Eneo MPC-52A0030P0A User Manual

Chapter 3 — Program and Operation

3.1 Camera Selection

IF you use the keyboard, before you program or operate a camera, you must select the camera by
pressing No. + CAM keys.
Example: Pressing 1 , 0 + CAM keys sequentially will select camera 10. The selected camera
ID will be displayed on the LCD monitor of the keyboard.

3.2 Accessing the On-Screen Menu Utility

You can call up the On-screen menu utility on your monitor by pressing the MENU key on the
keyboard or DVR, the following On-screen menu utility will appear:

3.3 How to control the On-Screen Menu Utility

Call the On-screen menu utility.
Navigate through the menu items.
Go into the sub-menu items.
Change value.
Enter the editing title mode.
Enter the changing angle mode.
Exit the changing angle mode.
PRESET
TOUR
PRIVACY ZONE
CAMERA
COMMUNICATION
ALARM
SYSTEM SETUP
EXIT(ESC TO EXIT)
Function
MAIN MENU
Right, Left or IRIS Open
Right, Left, Tele or Wide
10
Button
MENU
Up or Down
IRIS Open
IRIS Close