Setting Menu Items - Sony HDC-P43 Operation Manual

To return to the TOP MENU screen
Align the arrow marker (,) with TOP at the top right of the
menu page then press the MENU SEL knob/ENTER button.
<VF DETAIL>
VF DETAIL :
CRISP
FREQUENCY:
FLICKER
AREA
ZOOM LINK:
COLOR DETAIL :
PEAK COLOR
CHROMA LEVEL: 100%
The TOP MENU screen appears.

Setting Menu Items

If a "?" mark is flashing at the left of the page number, press
the MENU SEL knob/ENTER button to change it to the arrow
marker (,). Setting on the displayed page is enabled.
1
Turn the MENU SEL knob/ENTER button to align the
arrow marker (,) with the desired item.
2
Press the MENU SEL knob/ENTER button.
The arrow marker (,) will change to a flashing "?" mark.
3
Turn the MENU SEL knob/ENTER button to change
the setting value.
When the knob is rotated quickly, the values will change
quickly; when rotated slowly, the values will change slowly.
To interrupt settings
Set the DISPLAY/MENU switch to OFF to turn off the
menu screen display.
The setting operation can be restarted by setting the
DISPLAY/MENU switch back to MENU.
4
Press the MENU SEL knob/ENTER button.
The "?" mark changes back to the arrow marker (,), and
the new setting will be registered.
5
To change other setting items on the same menu
page, repeat steps 1 to 4.
To specify a character string
When you press the MENU SEL knob/ENTER button with the
arrow marker (,) pointing to an item for which a character
string, such as a file ID, is to be specified, a cursor and the list
of selectable characters are displayed.
The displayed cursor can be moved by rotating the MENU
SEL knob/ENTER button.
1
Set the cursor to the position where you wish to enter
a character, then press the MENU SEL knob/ENTER
button.
Another cursor appears on the character list.
2
Set the cursor to the character to be entered and
press the MENU SEL knob/ENTER button.
Repeat steps 1 and 2.
03 TOP
ON 25%
: 0
9M
: OFF
: 70%
ON 100%
ON BLUE
: ON
By selecting INS on the line below the character list, you
can enter a space at the cursor position.
Selecting DEL deletes the character at the cursor position.
You can return to step 1 without changing the character by
selecting RET.
If you enter the permitted maximum number of characters
(up to the stop mark at the right end of the line), the cursor
moves to ESC on the line below the character list.
To register the new string you have set, select END and
press the MENU SEL knob/ENTER button.
To restore the previous string, select ESC and press the
MENU SEL knob/ENTER button.
To return a menu item to its standard value
Select the menu item to be returned to its standard value then
hold the MENU SEL knob/ENTER button pressed for 3
seconds while the arrow marker (,) is displayed.
If "10 SEC CLEAR" has been set to ON on the <FILE CLEAR>
page of the FILE menu, you can return the setting in the
reference file for the item being selected to the factory-set
value by holding the MENU SEL knob/ENTER button pressed
for another 10 seconds.
To end menu operations
Set the DISPLAY/MENU switch to OFF.
18