Selecting a Page
To select a page from the CONTENTS page
Rotate the menu control knob to align the , pointer with the
desired page and press the menu control knob.
If the screen can be scrolled, arrows will indicate
the direction for scrolling.
CONTENTS
xx
01.<SW STATUS>
02.<VIDEO LEVEL>
03.<COLOR TEMP>
, pointer
04.<GAMMA>
c
05.<BLACK GAMMA>
06.<SATURATION>
07.<KNEE>
08.<WHITE CLIP>
09.<DETAIL 1>
10.<DETAIL 2>
11.<SD DETAIL>
12.<SD CROSSCOLOR>
13.<SKIN DETAIL>
14.<USER MATRIX>
The selected page is displayed.
Press the menu control knob to confirm the page selection.
<GAMMA>
[R] [G] [B] [M]
LEVEL
:
0
c
COARSE :
0.45
To change the displayed page
1
Check that the , pointer is located on the left of the page
number and press the menu control knob.
The , pointer changes to a flashing question ? mark.
<GAMMA>
[R] [G] [B] [M]
LEVEL
:
0
COARSE :
0.45
2
Rotate the menu control knob to flip through the pages, and
press the menu control knob when the desired page is
displayed.
The ? mark will change back to the , pointer, and operations
on the selected page are enabled.
To return to the TOP MENU screen
Align the , pointer with "TOP" at the top right of the menu page
and press the menu control knob.
<GAMMA>
[R] [G] [B] [M]
LEVEL
:
0
COARSE :
0.45
P00
TOP
Page No.
P04 TOP
0
0
0
Flashing
?P04 TOP
0
0
0
P04
TOP
c
0
0
0
Setting Menu Items
If a ? mark is flashing on the left of the page number, press the menu
control knob to change it to the , pointer. Operation on the
displayed page is enabled.
1
Align the , pointer with the desired item and press the
menu control knob.
The , pointer changes to a flashing question ? mark.
2
Rotate the menu control knob to change the setting value.
When the knob is rotated quickly, the values will change
quickly; when rotated slowly, the values will change slowly.
To reset a changed value
If you set the STATUS/CANCEL switch to CANCEL before
pressing the menu control knob, the setting will be returned to
its previous value.
To interrupt settings
Set the DISPLAY/MENU switch to OFF to turn off the menu
screen display.
The setting operation can be restarted by setting the DISPLAY/
MENU switch back to MENU.
3
Press the menu control knob.
The ? mark will change back to the , pointer, and the setting
will be registered.
4
To change other setting items on the same menu page,
repeat steps 1 to 3.
To specify a character string
When you press the menu control knob with the , pointer aligned
with an item for which a character string, such as a file ID, is to be
specified, a rectangular cursor and a list of selectable characters are
displayed.
The cursor can be moved by rotating the menu control knob.
1
Set the cursor to the position where you wish enter a
character, then press the menu control knob.
A cursor appears in the character list.
2
Set the cursor to the character to be entered and press the
menu control knob.
Repeat steps 1 and 2.
• By selecting INS on the line below the character list, you can
enter a space at the cursor position.
• Selecting DEL deletes the character at the cursor position.
• You can return to step 1 without changing the character by
selecting RET.
• If you enter the permitted maximum number of characters
(up to the stop mark at the right end of the line), the cursor
moves to ESC below the character list.
3
Select END and press the menu control knob.
The new string you have set is registered.
To restore the previous string
Select ESC and press the menu control knob.
34