Using The Switchover Key (Hipath 4000) - Siemens HiPath 4000 Operating Instructions Manual

Calling several persons simultaneously
Step by Step
Switchover
Switchover
Switchover
Switchover
20

Using the switchover key (HiPath 4000)

You can use the switchover key, which must be installed
by the system administrator beforehand, for the follo-
wing functions:
• Consultation (back to the waiting party or back to
the waiting conference)
• Toggling
Accepting a waiting call (the call-waiting function
•
must be activated see ! page 12)
• Accepting a group call
Call waiting
You hear a camp-on busy tone.
Press the flashing key. You accept the camp-on call. The
lamp comes on.
Toggling
You are connected to two subscribers: one is waiting.
The switchover key is illuminated.
Press the key to select the other subscriber. The first
subscriber is waiting.
Consultation
You call a second subscriber. The second subscriber
does not respond.
Press the key to return to the waiting subscriber or the
waiting conference.
Group calls
You are connected to a subscriber. There is a pending
group call.
Press the flashing key. You accept the group call; the 1
subscriber is put on hold. The lamp comes on.
st