Controlling Relays (Not For Hipath 2000) - Siemens HiPath 2000 Operating Instructions Manual

Using Other Functions/Services
Step by Step
qmd
or
50
Controlling Relays
(Not for HiPath 2000)
If this feature is configured (contact the service person-
nel), you can turn up to four relays on and off to control
different facilities (such as a door opener).
Depending on how they are programmed, you can
switch the relays on and off or switch them on and have
them switched off automatically after a timeout.
n
Lift the handset.
rmd
Enter the code for "on" or "off".
e h w
... Enter the relay.
Special features must be taken into consider-
ation if your telephone operates with
HiPath 5000 (system networking via PC net-
work) ! Page 61!