Selecting clips by type (Filter
You can select clips of a certain type from among
all of the clips on a disc (Filter Clips function).
For example, you can do the following.
• Select clips in a certain video format from a disc
that contains clips in different video formats.
• Select clips that have been set "NG" as a clip
flag, and delete all of those clips in one
• Select only clips that have been recorded on the
basis of a specified planning metadata entry,
and transfer those clips to an external device
using the Direct FTP function.
To filter clips
See page 109 for more information about thumbnail
Display the clip thumbnail screen.
If you want to select clips by video
format, select the thumbnails of clips in
Display the Thumbnail menu.
Select "Filter Clips", and then press the
SET/S.SEL button or the MENU knob.
The Filter Clips screen appears.
Select the clip filtering condition.
Clip Flag: OK
Clip flag set in the clip
Clip Flag: NG
Clip Flag: none
Clips that have been
recorded according to the
instructions in the
currently loaded planning
AV Format of
Video format of the
Press the SET/S.SEL button or the
A filter thumbnail screen appears, showing
only clips that meet the specified condition.
The filtering condition appears at the lower
left of the screen.
If you want to filter the clips again with
a different filtering condition (to
narrow down the filtering results),
repeat steps 2 to 6. (The command name
selected in step 4 changes to Filter
To play selected clips continuously
Register all of the filtered clips in an
automatically generated clip list, and play the clip
Display the Thumbnail Menu in the
filter thumbnail screen.
Select "Copy to Clip List", and then
press the SET/S.SEL button or the
A clip list thumbnail screen appears, showing
filtered clips that have been registered in the