Table of Contents
Advertisement
Using the chapter function to find scenes
Chapters are the sections between the shot marks,
Rec Start marks, and other essence marks.
Rec Start essence marks are set automatically at
the start of recording, but shot marks can be set at
any scene during recording or playback.
The chapter function allows you to display
thumbnails of the chapters in a clip.
See "Recording essence marks" (page 79) for more
information.
See page 109 for more information about thumbnail
screen operations.
1
In the clip thumbnail screen, select the
thumbnail of a clip with chapters set.
The "S" mark appears on the thumbnails of
clips with chapters set.
2
Press the HOLD/CHAPTER button.
The chapter thumbnail screen (see page 104)
appears, with thumbnails of the frames where
chapters are set.
The "S1", "S2", and "RS" marks on the
thumbnails indicate frames where Shot
Mark1, Shot Mark2, and Rec Start essence
marks are set.
To delete the shot mark at a chapter position
You can delete the shot mark (Shot Mark0 to Shot
Mark9) at the chapter position in the chapter
thumbnail screen. (Rec Start essence marks
cannot be deleted.)
1
In the chapter thumbnail screen, select
the thumbnail for the frame whose shot
mark you want to delete.
2
Display the Thumbnail Menu.
3
Select Delete Essence Mark.
A message appears asking if you are sure that
you want to delete the shot mark.
112
Thumbnail Operations
4
Select OK to delete the mark, or Cancel
to cancel the deletion, and then press the
SET/S.SEL button or the MENU knob.
To adjust the position of shot marks at chapter
positions
You can use the chapter thumbnail screen to
adjust the position of shot marks (Shot Mark0 to
Shot Mark9) at chapter positions. (The positions
of Rec Start essence marks cannot be adjusted.)
1
In the chapter thumbnail screen, select
the thumbnail of the shot mark whose
position you want to adjust.
2
Display the Thumbnail Menu.
3
Select Move Essence Mark.
The Move Essence Mark screen is displayed.
You can perform playback and searches in
this screen.
4
Use the PLAY/PAUSE button or F
REV/F FWD buttons to display the
frame you want.
You can also perform jog playback by
turning the MENU knob.
5
Select OK, and then press the SET/
S.SEL button or the MENU knob.
To display the chapter thumbnail screen of the
previous or next clip with chapters
With the chapter thumbnail screen still active,
press the PREV button or the NEXT button.
The unit searches in the reverse or forward
direction for the next clip with chapters,
beginning with the previous or next clip.
Using essence marks to find scenes
See page 109 for more information about thumbnail
screen operations.
1
In the clip playback screen or the clip
thumbnail screen, press the
Advertisement
Table of Contents
