Download  Print this page

File Menu - Sony PDW-680 Operation Manual

Professional disc camcorder.
Hide thumbs

Advertisement

No.
Page
Item
27
UP
UP CON PROCESS FIELD/ADPT
CONVERTER
UC DETAIL
LEVEL
UC CRISPENING
UC DETAIL LIMIT (–99 to 99)
UC LV DEPEND
LVL
UC DTL
FREQUENCY
UC DTL H/V
RATIO
28
CIS COMP
FLICKER REDUCE OFF/ON/AUTO Sets whether to run the
FLICKER FREQ
a) The setting of this item is overridden by the setting of
Other BEFORE END when TYPE DETECTION in
the BATTERY 2 page is set to "OTHER".
b) The setting of this item is overridden by the setting of
Other END when TYPE DETECTION in the
BATTERY 2 page is set to "OTHER".
c) When TYPE DETECTION in the BATTERY 2 page
is set to "AUTO", any batteries other than Sony BP-
series batteries and Anton Bauer intelligent battery
systems are classified as "Others".

FILE menu

No.
Page
Item
01
USER FILE
USER FILE LOAD
USER FILE SAVE
F.ID
USER PRESET
Settings
Description
Selects the conversion source picture when
SD is upconverted to HD.
FIELD: Use the field picture.
ADPT: Optimize the ratio of conversion from
the frame or field picture.
(–99 to 99)
Adjusts the sharpness of edge enhancement
by the upconverter.
(–8 to 7)
Sets the amplitude width at which the
upconverter does not emphasize low-
amplitude signals.
Sets the maximum level of edge enhancement
by the upconverter.
(–8 to 7)
Sets the luminance of edge enhancement by
the upconverter.
3.2M/4.5M/
Sets the center frequency and frequency
5.0M/4.0M
properties of edge enhancement by the
upconverter.
3.2M: 3.2 ± 1.1 MHz
4.5M: 4.5 ± 1.4 MHz
5.0M: 5.0 ± 0.7 MHz
4.0M: 4.0 ± 2.0 MHz
(–3 to 4)
Sets the horizontal/vertical ratio of edge
enhancement by the upconverter.
flicker correction function.
50Hz/60Hz
Sets the power supply
frequency of the lighting
causing the flicker.
d) Flashes once per second when the battery status is
"BEFORE END", and flashes 4 times per second
when the battery status is "END".
e) A setting for this item is required when AU CH34
AGC MODE in the AUDIO-2 page is set to OFF.
f) A setting for this item is required when the DWR-
S01D Digital Wireless Receiver is installed.
g) SDI OUT 1 SELECT or SDI OUT 2 SELECT in the
OUTPUT 1 page of the OPERATION menu must be
set to HDSDI.
Settings
EXEC
EXEC
Blank/up to 16
characters
EXEC
Description
For details, see "Saving and
Recalling User Files" on page
215.
For details, see "Resetting USER
menu settings to the standard
settings" on page 196.
Menu List
183

Advertisement

Table of Contents

   Also See for Sony PDW-680

   Related Manuals for Sony PDW-680

Comments to this Manuals

Symbols: 0
Latest comments: