When the connection is complete (the
indicators of all items have turned green), the
Upload Clips via Direct FTP screen appears.
To check the connection on the remote
If the remote host is an XDCAM device,
check that the "NETWORK!" has appeared
in the display or other status display location.
The progress bars show the progress of the
transfer. If multiple clips are being
transferred, a count of the clips that have
been successfully transferred appears.
If the remote host is an XDCAM device, the
disc usage also appears. (It does not appear if
the remote host is a computer).
If a file of the same name already exists at
the transfer destination
The file name is changed so that it does not
conflict with the file at the destination.
The name of the file on the transfer source
(this unit) appears in the "Original" field, and
the name of the file on the transfer
destination appears in the "Copy" field.
1) If the clip name is a standard name, it is changed
to the unused clip name with the smallest
number. (Example: If names C0001 to C0020
are in use, the name "C0021".)
If the clip name is a user-defined name, a serial
number is appended to the clip name. (Example:
If the name is "EveningNews",
To cancel the processing
Do one of the following.
• Select "Abort: Immediately", and then
press the SET/S.SEL button or the MENU
• If you are transferring multiple clips, select
"Abort: After this clip", and then press the
SET/S.SEL button or the MENU knob.
(The transfer of subsequent clips will be
cancelled after transfer of the current clip
Transferring clips (Direct FTP function)
• Set the ETHERNET/USB item on the
POWER SAVE page of the OPERATION
menu to DSABL.
When several files are to be transferred, the entire
transfer task is cancelled when the first transfer
failure occurs. Subsequent clips are not transferred.
When the transfer of all files has finished, the
Uploading Result Report screen appears.
Select "OK", and then press the SET/S.SEL
button or the MENU knob. This returns you
to the clip thumbnail screen.
To upload part of a clip
You can select part of a clip in the expand
thumbnail screen or the chapter thumbnail screen
and upload that part.
Expand thumbnail screen: The clip is divided
arbitrarily into parts of equal length,
regardless of content. Use this method if you
do not need to specify the transfer range
Chapter thumbnail screen: Use this method if
you want to transfer a specific range. (By
setting essence marks at the start point and
end point of the transfer range, you can
specify the range with a precision of one
In the clip thumbnail screen, select a
clip and press the EXPAND or
The expand thumbnail screen or the chapter
thumbnail screen appears.
Select the transfer range.
To select multiple thumbnails
While holding the SHIFT key down, turn the
MENU knob, or press the B/IN or b/OUT