Attach the VCT-14 tripod adaptor (not
supplied) to the tripod.
Mount the camcorder on the tripod
Slide the camcorder forward along the
groove in the adaptor until it clicks.
To remove the camcorder from the tripod
Hold down the red button and pull the lever in the
direction of the arrow.
The tripod adaptor pin may remain in the engaged
position even after the camcorder is removed. If this
happens, press the red button against the lever a second
time and move the lever as shown above until the pin
returns to the stowed position. If the pin remains in the
engaged position, you will not be able to mount the
camcorder on the tripod adaptor.