Set the F-RUN/SET/R-RUN switch to
F-RUN, and check that the timecode
indication starts changing again and
continues to change even when you
restart recording and stop recording
Set the DISPLAY switch to U-BIT, and
check that the user bit data that was set
Cleaning the viewfinder
Use a dust blower to clean the CRT screen and
mirror inside the viewfinder barrel.
Clean the lens and protecting filter with a
commercially available lens cleaner.
Never use organic solvents such as thinners.
Disassembling the eyepiece for cleaning
1 Viewfinder barrel
2 Eyecup holder
3 Protecting filter
4 Packing ring
Detach the eyepiece from the viewfinder
For the detaching procedure, see "Detaching
the eyepiece" on page 37.
Remove the eyecup from the eyecup
Remove the protecting filter, together
with the packing ring, from inside the
Detach the protecting filter from the