Selecting Clips By Type (Filter Clips Function) - Sony PDW-850 Operation Manual

2
Press the PLAY/PAUSE button.
Selecting clips by type (Filter
Clips function)
You can select clips of a certain type from among
all of the clips on a disc (Filter Clips function).
For example, you can do the following.
• Select clips in a certain video format from a disc
that contains clips in different video formats.
• Select clips that have been set "NG" as a clip
flag, and delete all of those clips in one
operation.
• Select only clips that have been recorded on the
basis of a specified planning metadata entry,
and transfer those clips to an external device
using the Direct FTP function (see page 140).
To filter clips
See page 114 for more information about thumbnail
screen operations.
1
Display the clip thumbnail screen.
2
If you want to select clips by video
format, select the thumbnails of clips in
that format.
3
Display the Thumbnail menu.
4
Select "Filter Clips", and then press the
SET/S.SEL button or the MENU knob.
The Filter Clips screen appears.
5
Select the clip filtering condition.
Item name Filtering condition
Clip Flag: OK Clip flag set in the clip
(OK/NG/KP(KEEP)/
Clip Flag: NG
none)
Clip Flag:
KP(KEEP)
Clip Flag: none
Current Planning Clips that have been
Metadata recorded according to the
instructions in the
currently loaded planning
metadata
AV Format of Video format of the
Selected Clip selected clips
6
Press the SET/S.SEL button or the
MENU knob.
A filter thumbnail screen appears, showing
only clips that meet the specified condition.
The filtering condition appears at the lower
left of the screen.
7
If you want to filter the clips again with
a different filtering condition (to
narrow down the filtering results),
repeat steps 2 to 6. (The command name
selected in step 4 changes to Filter
Clips(Narrowing).)
To play selected clips continuously
Register all of the filtered clips in an
automatically generated clip list, and play the clip
list.
1
Display the Thumbnail Menu in the
filter thumbnail screen.
2
Select "Copy to Clip List", and then
press the SET/S.SEL button or the
MENU knob.
A clip list thumbnail screen appears, showing
filtered clips that have been registered in the
clip list.
Thumbnail Operations 119