Sony PDW-680 Operation Manual page 174

Professional disc camcorder
Hide thumbs Also See for PDW-680:
Table of Contents

Advertisement

No.
Page
12
CAM
CONFIG 1
174
Menu List
Item
Settings
REC TALLY
OFF/ON
BLINK
REC START BEEP OFF/ON
SUB LCD MODE
TIMER/OFF/
SEL
CONT
SUB LCD TIMER
1H/3H/8H
HDSDI REMOTE
OFF/CHARA/
I/F
G-TLY/R-TLY
PROAV DISPLAY
DSABL/ENABL Specifies whether to display the PROAV
MIXED
DSABL/ENABL For details, see "Mixed recording of clips in
RECORDING
SINGLE CLIP
OFF/ON
MODE
PB POSITION
KEEP/TOP
Description
Turns the tally illumination control on or off
when the battery is almost exhausted or the
disc is almost full.
Turns on or off the REC START/STOP alarm
sound.
Sets the timecode (TC) display after poweroff
as follows.
TIMER: The TC display turns off after the
elapse of the time set by the SUB LCD
TIMER below.
OFF: Not displayed.
CONT: Displayed.
Sets the duration of time after which the TC
display is to be turned off after power-off,
when the SUB LCD MODE SEL item, above,
is set to "TIMER" (H: hours).
Selects whether to use the function that
enables recording control from this unit of an
external device connected to one of the SDI
OUT 1/2 connectors (HDSDI output) of this
g)
unit.
Also selects the indication that shows
whether the external device is recording.
OFF: Do not use the remote recording control
function.
CHARA: Use the function, and indicate by
the controlling external device indicator
in the viewfinder (see page 30).
G-TLY: Use the function, and indicate by the
TALLY indicator in the viewfinder.
R-TLY: Use the function, and indicate by the
REC (recording, red tally) indicator in
the viewfinder.
Note
When R-TLY is selected, the TALLY indicator
lights even when the unit is not recording.
directory when this unit is accessed by a
FAM/FTP connection.
DSABL: Do not display.
ENABL: Display.
different formats on the same disc" on page 53.
For details, see "Clip playback modes" on
page 77.
When you switch between the clip playback
screen and the clip list playback screen,
specifies the clip or sub clip playback start
position.
KEEP: Play from the position where
playback stopped.
TOP: Play from the first frame of the first clip
or sub clip.

Advertisement

Table of Contents
loading

Table of Contents