To change the range of choice of shutter
mode and speed settings
You can reduce the time required to select the
shutter mode and speed by narrowing the choice
of settings in advance. This can be done by using
the SHT ENABLE page of the OPERATION
The settings selected on the SHT ENABLE page of the
OPERATION menu become invalid when the RM-B170
or another remote control unit is connected to the
Display the SHT ENABLE page of the
OPERATION menu, and press the
For details on menu operations, see "Basic
menu operations" on page 189.
022 SHT ENABLE
Turn the MENU knob to move b to the
shutter mode or shutter speed you want,
then press the MENU knob.
b on the left of the selected item changes to
z and z on the left of the setting changes to
Turn the MENU knob until ON
appears, then press the MENU knob.
z on the left of the selected item changes to
b and ? on the left of the setting changes to
To set another mode or speed, return to step
Note that only the shutter speeds set to ON
can be selected with the SHUTTER selector.
To end the menu operation, set the
MENU ON/OFF switch to OFF or close
the cover of the menu operating section.
The menu disappears from the screen and the
display indicating the current status of the
camcorder appears along the top and bottom
of the screen.
Setting the Electronic Shutter