Table of Contents
Advertisement
No.
Page
Item
25
SOURCE SEL FRONT MIC SELECT
(When stereo
microphone is
connected)
REC VIDEO SOURCE
(When the CBK-HD01
or CBK-SC02 option
board is installed)
EXT VIDEO SOURCE
(When the CBK-HD01
or CBK-SC02 option
board is installed)
WIDE MODE(EXT)
(When the CBK-HD01
or CBK-SC02 option
board is installed)
SETUP REMOVE
(When the COUNTRY
item is set to
"NTSC(J)AREA" or
"NTSC AREA" and the
CBK-SC02 option
board is installed)
26
UMID SET
COUNTRY CODE
ORGANIZATION
USER CODE
TIME ZONE
Settings
Description
MONO/STREO
Input mode selection for front
microphone.
CAM/EXT
For details, see "Recording video
from external devices" (page 95).
VBS/SDSDI/HDSDI
(VBS is displayed when
the CBK-SC02 is
installed. SDSDI and
HDSDI are displayed
when the CBK-HD01 is
installed.)
AUTO/16:9
When the input signal is SD,
select the method that determines
whether the signal is treated as a
wide signal.
AUTO: When wide picture
16:9: Always treat the signal as a
0.0%/7.5%
Selects whether to modify the
setup level of input video signals.
7.5%: Remove the setup. (Select
0.0%: Do not remove the setup.
Blank/up to 4 characters For details, see "Setting the
UMID data" on page 212.
Blank/up to 4 characters
Blank/up to 4 characters
00 to 3F
information is detected in the
input signal, treat the signal
as a wide signal and set the
up-converter operating mode
to squeeze mode. Record
wide picture information
when recording SD. When
wide picture information is
not detected, set the up-
converter operating mode to
edge crop mode and do not
record wide picture
information.
wide signal and set the up-
converter operating mode to
squeeze mode. Record wide
picture information when
recording SD.
when signals with 7.5%
setup are input.)
(Select when signals without
setup are input.)
Menu List
155
Advertisement
Table of Contents
