Table of Contents
Advertisement
3
Turn the MENU knob to display the
desired area of use.
Setting
Area of use
NTSC(J)AREA
NTSC area (Japan)
NTSC AREA
NTSC area (for areas other
than Japan)
PAL AREA
PAL area
a) The composite signal output from this unit is an
NTSC signal with no black setup. The system
frequency is 59.94i.
b) The composite signal output from this unit is an
NTSC signal with a black setup (7.5 IRE). The
system frequency is 59.94i.
c) The composite signal output from this unit is a
PAL signal. The system frequency is 50i.
4
Set the POWER switch to OFF, then
once again to ON.
The unit is now ready for use.
Setting the Date/Time of
the Internal Clock
a)
b)
c)
You can set or change the date and time of the
internal clock. The date and time set are reflected
in the timecode.
(How to select an item in the menu screen: Turn
the MENU knob to move b to the desired item.)
1
2
3
Display the TIME/DATE page of the
DIAGNOSIS menu, and press the
MENU knob.
For details on menu operations, see "Basic
menu operations" on page 189.
D02 TIME/DATE
ADJUST
HOUR
MIN
SEC
YEAR
MONTH
DAY
Press the MENU knob.
The TIME ADJUST setting window appears.
TIME ADJUST
HOUR
MIN
SEC
YEAR
MONTH
DAY
OK
• HOUR: Sets the hour value.
• MIN: Sets the minutes value.
• SEC: Sets the seconds value.
• YEAR: Sets the year.
• MONTH: Sets the month.
• DAY: Sets the day.
Turn the MENU knob to move b to the
item you want to set, and press the
MENU knob.
b
on the left of the selected item changes to
z and z on the left of the setting changes to
?.
Setting the Date/Time of the Internal Clock
TOP
:
EXEC
:
12
:
55
:
58
:
08
:
03
:
31
ESC
:
12
:
55
:
58
:
08
:
03
:
31
39
Advertisement
Table of Contents
