Download  Print this page

Using Ac Power; Attaching The Viewfinder; Attaching The Hdvf-20a/c35w - Sony PDW-680 Operation Manual

Professional disc camcorder.
Hide thumbs

Advertisement

To detach the battery pack
Holding the release button in, pull the battery
pack up.
Notes
• During recording and playback (while the ACCESS
indicator is lit), be careful never to remove the battery
pack.
• Make sure to power the camcorder off before replacing
the battery pack.

Using AC power

When using the AC-DN10 AC Adaptor
Mount an AC-DN10 on the camcorder in the
same way as a battery pack, then connect to the
AC power supply.
The AC-DN10 can supply up to 100 W of power.
34

Attaching the Viewfinder

Release button
To an AC outlet
Attaching the Viewfinder
CAUTION
When the viewfinder is attached, do not leave the
camcorder with the eyepiece facing the sun. Direct
sunlight can enter through the eyepiece, be focused in the
viewfinder and cause fire.
Note
The viewfinder is supplied separately.

Attaching the HDVF-20A/C35W

Note
When attaching the viewfinder, make notes of the
following points.
• Be sure to the power off the camcorder before coupling
the viewfinder connector to the camcorder's VF
connector. If you make this connection when the
camcorder power is on, the viewfinder may not
function properly.
• Couple the viewfinder connector firmly to the
camcorder's VF connector. If the coupling is loose,
noise may appear on the video or the tally light may not
operate properly.
For more information about the connection of the
viewfinder and camcorder, contact a Sony service
representative.
1
1 Loosen the viewfinder left-to-right
positioning ring, 2 attach the
viewfinder to the viewfinder fitting
shoe, and 3 tighten the viewfinder left-
to-right positioning ring.

Advertisement

Table of Contents

   Also See for Sony PDW-680

   Related Manuals for Sony PDW-680

Comments to this Manuals

Symbols: 0
Latest comments: