Download  Print this page

Sony PDW-680 Operation Manual Page 138

Professional disc camcorder.
Hide thumbs

Advertisement

6
Select the remote host (the target device
to which you want to transfer the clips).
You can register up to four remote hosts.
Remote Host 1 to 3: Register these in the
settings screen.
Remote Host 4(UPnP): A remote host that
supports UPnP (universal plug and play)
is detected and registered automatically
(see "To enable the UPnP function"
(page 137)).
To check remote hosts discovered by the
UPnP function
Select "Hosts Discovered via UPnP", and
then press the SET/S.SEL button or the
MENU knob. (If the UPnP function of this
unit is disabled, a confirmation screen
appears prompting you to enable it. Select
"OK" and then press the SET/S.SEL button
or the MENU knob. The UPnP function will
be enabled when you power the unit off and
then on again.)
The Select Host Discovered via UPnP screen
appears. (Some time may be required before
the search for remote hosts finishes.)
Select the name of a remote host from the list,
and press the SET/S.SEL button or the
MENU knob. A network settings screen
appears (see step 7). If you establish a
connection with the selected remote host, the
network settings are saved in Remote Host 4.
From the next time that you select "Remote
Host 4(UPnP)", the remote host that you
select here will be connected.
To check the network settings of this unit
Select "Network Config", and then press the
SET/S.SEL button or the MENU knob. The
following network settings appear.
138
Transferring clips (Direct FTP function)
Item
Setting
Host Name
Host name
IP Address
IP address
Subnet Mask
Subnet mask
DHCP
Setting that specifies
whether to acquire the IP
address automatically from
a DHCP server
Enabled: Acquire
Disabled: Do not acquire
Address Status
Method used to set IP
address
Manual Set: Manually
DHCP: DHCP function
AutoIP: Auto IP addressing
Undefined: Nothing
Default Gateway Default gateway
a) An IP address determined by a DHCP server
appears instantly in this field.
Select OK and press the SET/S.SEL button
or the MENU knob to return to the previous
screen.
7
Select ,, and then press the SET/
S.SEL button or the MENU knob.
A network settings screen for the remote host
appears.
Item
Setting
Host Name
Host name or IP address. (If
this is a host name, a DNS
server must be available on the
connected network.
Specification of an IP address
is recommended.)
Port
Port used by the FTP server
(normally "21").
a)
automatically
automatically
function
specified

Advertisement

Table of Contents

   Also See for Sony PDW-680

   Related Manuals for Sony PDW-680

Comments to this Manuals

Symbols: 0
Latest comments: