USER & ALL
RM REC START
SHT DISP MODE
RM F NO DISPLAY CTRL/RET
FOCUS MAG SW
Selects the test signal.
Selects the HD color bar type.
Show only USER menu in the top menu.
Selects whether or not to share settings for
when a remote control unit is connected and
when the unit is used alone.
When an RM remote control unit is
connected, selects which recording start/stop
buttons are enabled.
RM: remote control unit
Selects shutter speed display (seconds or
Switches the iris F value display type on
remote control units such as the MSU-900.
CTRL: Display based on control value from
RET: Display based on position value from
Specifies the control method for the cooling
fan. (This setting is retained even when the
unit is powered off.)
AUTO: Control the rotation of the cooling fan
R.MIN: Rotate the cooling fan at low speed
during recording only (and stop the
rotation when this unit is used in an
environment so cool that temperatures
inside the unit do not rise).
MIN: Rotate the cooling fan at low speed
(and stop the rotation when this unit is
used in an environment so cool that
temperatures inside the unit do not rise).
Regardless of this setting, the cooling fan
rotates at high speed if temperatures inside the
unit rise to a temperature near the alarm level.
Selects the method that activates the FOCUS
MAG function when the function is assigned
to an ASSIGN switch.
MTRY: The function is on as long as the
switch is held down.
ALT: Each press of the switch toggles
between on and off. (The function goes
off automatically five seconds after it is