Table of Contents
Advertisement
PCL Menu Item
SYMSET
ROMAN-8*
ISO L1
ISO L2
ISO L5
PC-8
PC-8 D/N
PC-850
PC-852
PC8-TK
WIN L1
WIN L2
WIN L5
DESKTOP
PS TEXT
VN INTL
VN US
MS PUBL
MATH-8
PS MATH
VN MATH
PI FONT
LEGAL
ISO 4
ISO 6
ISO 11
ISO 15
ISO 17
ISO 21
ISO 60
ISO 69
WIN 3.0
AUTO RESET
ON*
OFF
PS Menu
Use the PS Menu to define the way the printer handles PostScript jobs. The
following table describes the settings you can change from the PS Menu. An
asterisk (*) next to a value in the table indicates the factory default.
78
InfoPrint 20: User's Guide -- Web Version
Value
Specifies the symbol set to use.
Specifies whether a PCL reset (reset of the PCL environment and
printing of any partial pages) occurs at the PORT TMEOUT value.
v ON*—Reset occurs at the PORT TMEOUT values, which are set
on each printer attachment menu. All PCL settings, such as
orientation and paper source, will be reset to the power-on default
values. Downloaded fonts that have NOT been designated as
"permanent" will also be lost. Partial pages, such as the last page
of a job sent without an end-of-forms command, will be ejected.
The default of ON is recommended for most situations.
v OFF—The above resets will NOT occur at the PORT TMEOUT.
This allows compatibility with applications designed for HP
printers with this behavior. It is not recommended for users
printing with InfoPrint 20 drivers.
Notes:
1. When the printer actually switches to another port, the PCL
settings will be lost, regardless of the AUTO RESET value.
2. AUTO RESET is NOT relevant to datastream switching. If the
printer switches datastreams before the PORT TMEOUT, the
PCL settings will only be saved if PCL SAVE=YES. See
"Memory Configuration (Memconfig) Menu" on page 74.
Description
Advertisement
Table of Contents
