Table of Contents
Advertisement
Parallel Menu Item
Value
PORT TMEOUT
nnn
PCL Menu
Use the PCL Menu to define the way the printer handles PCL5e jobs. The following
table describes the settings you can change from the PCL Menu. An asterisk (*)
next to a value in the table indicates the factory default.
Notes:
1. To select a new value, press the Enter key when the value is displayed in the
2. Values set in PCL5e print jobs (either by the print application or the printer
3. If you are unfamiliar with using the operator panel to work with menus, please
PCL Menu Item
PAGEPROT
AUTO*
ON
COPIES
nnn
PAGESIZE
LETTER*
LEGAL
FOLIO
11X17
A4
JIS-B5
B4
A5
A3
EXEC
STATMNT
MONARCH
HAGAKI
COM10
C5
DL
UNIV
UNI-ENV
76
InfoPrint 20: User's Guide -- Web Version
Description
Specifies how many seconds the printer waits for data before it
determines there is no more data to receive for the job. The printer
then checks other attachments for jobs, if other attachments are
installed. The valid range is 5 to 300 seconds. The default value is
15 seconds.
message display area. An asterisk (*) appears next to the value in the message
display area, indicating that it is now active.
driver) override PCL Menu values you set at the printer.
read "Using the Operator Panel Keys" on page 16 and "Navigating Menus" on
page 17 before continuing.
Value
Sets page protection:
v AUTO—the printer protects the minimum amount of memory
necessary.
v ON—the printer reserves enough memory to process an entire
page without compression before it prints the page. This can help
in the rare case where the printer compression scheme causes a
loss of quality in complex graphics. This setting is available only
when the printer has enough memory. See "Memory
Requirements" on page 4 for more information.
Specifies how many copies of each job to print. nnn can be from 1
to 999. 1 is the default.
Specifies the default page size for PCL5e jobs.
Description
Advertisement
Table of Contents
